These Vega steering box brackets are CNC cut out of 1/4" steel.  They include 3 beefy spacers
cut from DOM tubing, and a gusset cut from 3/16" steel to help support the lower portion of the
steering box when welded on below the frame.  Our bracket is cut with plenty of material around
the bolt holes, so that you will not run the risk of breaking an ear off.

These are commonly Used on Model A, Model T and 32 Fords, but can be used on any custom
streetrod, hotrod or ratrod application.

These are a great addition to our boxing plates sets, if you are going to be using a vega style
steering box.

To state the obvious..some assembly, fitting and welding is required. =)
Vega Steering Box Mount
Discontinued
Vega Steering Box Bracket